All
Filters
- Adapters
- Air Vents
- Bell Ends
- Connectors
- Couplings
- Drip Irrigation
- Drip Line
- Drip Tape
- Drip Tube
- Elbows
- Emitters
- Fittings
- Flanges
- Galvanized Bushing
- Hose Clamps
- Irrigation Supplies
- Nipples
- Nuts
- Perma-Loc Fittings
- Perma-Loc Valves
- Plugs
- Regulators
- Schedule 40 Adapter
- Schedule 40 Bushing
- Schedule 40 Cap
- Schedule 40 Coupling
- Schedule 40 Cross
- Schedule 40 Elbow
- Schedule 40 Plug
- Schedule 40 Tee
- Schedule 80 Cap
- Schedule 80 Coupling
- Schedule 80 Nipple
- Schedule 80 Tee
- Sprayers
- Sprinklers
- Tee Fittings
- Tubing
- Unions
- Valves
Schedule 40 PVC Coupling - Socket x Socket
PRODUCT FEATURES: ASTM D-1784 - Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds ASTM D-2466 - So...
View full detailsPVC Male Adapter Insert
PRODUCT FEATURES: For COLD Water Only - Do Not Use In a Dwelling Listings - NSF 14 and 61 (National Sanitation Foundation) for potable water serv...
View full detailsPerma-Loc 3/4 in. Socket x 1 in. Spigot Adapter (ABS)
PRODUCT FEATURES: Very easy to install tubing over single barb Positive stop to assure tubing is fully installed Low effort, square thread drive r...
View full detailsToro Blue Stripe Polyethylene Hose, 100' Coil
PRODUCT FEATURES: Made from premium grade linear low density polyethylene for long lasting operation Plain/blank drip irrigation tube - no pre-sta...
View full detailsSenninger Pressure Regulator - 3/4" x 3/4" FPT
PRODUCT SPECIFICATIONS: Part No.: PMR20MF3F3FV Inlet / Outlet Size: 3/4 in. x 3/4 in. FPT Flow Rate Range: 2 - 20 GPM Pressure: 20 PSI Fitting mod...
View full detailsNetafim DripNet PC 690 Pressure Compensating Dripline, 1,000' Roll
PRODUCT SPECIFICATIONS: Coil Length: 1,000 ft. Series: 690 Wall Thickness: 60 Mil Inside Diameter: 0.690 in. (20 mm) Dripper Spacing: Multiple opt...
View full detailsGalvanized Reducer Bell Coupling
Hot dipped galvanized for durability Can be used with drinking water Meets standards: ASTM A153, NSF 73 Material: Steel Connection: FIP x FIP Prod...
View full detailsInsert Combination Tee - Insert x Insert x MPT
PRODUCT FEATURES: For COLD Water Only - Do Not Use In a Dwelling Listings - NSF 14 and 61 (National Sanitation Foundation) for potable water serv...
View full detailsGalvanized 90 Degree Street Elbow
PRODUCT SPECIFICATIONS: Degree: 90 Size: Various Available Material: Galvanized Product Type: Street Elbow
Schedule 80 PVC Slip Tee Fitting - Slip x Slip x Slip
PRODUCT FEATURES: ASTM D-2467 - Socket Type Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 Listings - NSF/ANSI Standard 61, Annex ...
View full detailsSchedule 40 PVC 90° Reducing Slip Elbow - Slip x Slip
PRODUCT FEATURES: Slip x Slip ASTM D-1784 - Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds AST...
View full detailsSchedule 40 PVC 90° Street Elbow - MPT x Slip
This PVC Elbow connects two PVC pipes together in a 90° angle. Commonly used in irrigation systems, sprinkler systems, swimming pools, and many oth...
View full detailsSchedule 40 PVC Compression Coupling
PRODUCT SPECIFICATIONS: Schedule: 40 Material: PVC Product Type: Compression Coupling
Perma-Loc 3/4" Female Swivel Tee
For use with polyethylene irrigation tubing and Total CV emitter line. Fittings are positive locking, insert type fittings with a threaded ring V...
View full details1/4 in. Black Micro Fitting Tee with Barb Connections
PRODUCT SPECIFICATIONS: Part No.: T 250 Size: 1/4 inch Color: Black Connections: Barb x Barb x Barb Length: 0.75 Product Type: Micro Fitting Tee ...
View full detailsIrritec Goof Plug
PRODUCT SPECIFICATIONS: Part No.: A5-AGP10 Product Type: Goof Plug Application: (Fits series 400 barb hole) .388, .440 in. 10 mm
Netafim Uniram CNL Pressure Compensating Dripline, 1,000' Roll
PRODUCT FEATURES: Prevents system drainage when pressure is turned off at the end of each irrigation cycle Prevents roots from penetrating the dri...
View full detailsFT3 Feedtube Assembly with 12 in. Stake and 30 in. Tubing
PRODUCT SPECIFICATIONS: Part No.: 12601-030 Brand: Nelson Series: FT3 Stake Length: 12 in. (300 mm.) Tubing Length: 30 in. Connection: Male Acme ...
View full detailsAntelco 12 in. High Density Rigid Riser with Quick Thread Adapter
PRODUCT FEATURES: Used throughout a micro irrigation system in conjunction with emitters and fittings HDPE (HD) Risers suit all 10-32 UNF threaded...
View full detailsGalvanized 45 Degree Elbow
PRODUCT SPECIFICATIONS: Degree: 45 Size: Various sizes available Material: Galvanized Product Type: Elbow
5/8 in. x 1/2 in. Socket x 3/4 in. Spigot Tape-Loc Adapter
PRODUCT FEATURES: Chemical, UV and heat resistant Time tested durability for superior in-field performance Extensive fitting line, largest selecti...
View full detailsJain 3/4 FHT x 3/4 in. MHT Wye Ball Valve
PRODUCT SPECIFICATIONS: Part No.: 12060024 3/4 Wye Black Large inside diameter for maximum flow Large handle for easy manual control Constructed o...
View full detailsSchedule 80 PVC Male Adapter - MPT x Slip
PRODUCT FEATURES: ASTM D-1784 - Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds ASTM D-2464 - Thr...
View full detailsPVC Reducer Insert Tee
PRODUCT FEATURES: Insert x Insert x Insert For COLD Water Only - Do Not Use In a Dwelling Listings - NSF 14 and 61 (National Sanitation Foundatio...
View full detailsNetafim 2 in. Nylon Continuous Acting Combo Air Vent
Model Number: 65ARIB2PP Size/Material: 2" Combo (N) Connection: MPT Top Width: 7.09" Height: 8.23" Weight: 1.9 lbs
Schedule 80 PVC Slip Cap
PRODUCT FEATURES: Slip Cap ASTM D-1784 - Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds ASTM D...
View full detailsSchedule 80 PVC 90° Elbow - Socket x Socket
PRODUCT FEATURES: ASTM D-1784 - Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds ASTM D-2464 - Th...
View full detailsSchedule 40 Adapter - FPT x Insert
PRODUCT FEATURES: For COLD Water Only - Do Not Use In a Dwelling Listings - NSF 14 and 61 (National Sanitation Foundation) for potable water serv...
View full detailsSchedule 80 PVC Slip Coupling
PRODUCT FEATURES: ASTM D-2467 - Socket Type Poly (Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80 Listings - NSF/ANSI Standard 61, Annex ...
View full detailsPVC 90° Insert Combination Reducer Elbow x FPT
PRODUCT FEATURES: Insert x FPT For COLD Water Only - Do Not Use In a Dwelling Listings - NSF 14 and 61 (National Sanitation Foundation) for potab...
View full detailsPVC 90° Insert Combination Elbow x FPT
PRODUCT FEATURES: Insert x FPT For COLD Water Only - Do Not Use In a Dwelling Listings - NSF 14 and 61 (National Sanitation Foundation) for potab...
View full detailsGalvanized Close Nipple
PRODUCT SPECIFICATIONS: Nipple Size: Close Material: Galvanized Product Type: Nipple End Connection: Threaded
Galvanized Nipple
PRODUCT SPECIFICATIONS: End Connection: Threaded Material: Carbon Steel Lead Free ISO 9001: 2000
Schedule 40 PVC Reducing Combination Tee - Insert x FPT
PRODUCT FEATURES: For COLD Water Only - Do Not Use In a Dwelling Listings - NSF 14 and 61 (National Sanitation Foundation) for potable water serv...
View full detailsSchedule 40 PVC 90° Elbow - FPT x FPT
This PVC Elbow connects two PVC pipes together in a 90° angle. Commonly used in irrigation systems, sprinkler systems, swimming pools, and many oth...
View full detailsSchedule 40 PVC Plug - Spigot
PRODUCT FEATURES: Spigot ASTM D-1784 - Rigid Poly (Vinyl Chloride) (PVC) Compounds and Chlorinated Poly Vinyl Chloride (CPVC) Compounds ASTM D-2...
View full details